Product Overview

Hospital ICU Backup Diesel Generator designed for intensive care units, ventilator systems, patient monitoring equipment, and critical emergency circuits, featuring ≤10s automatic startup, stable voltage recovery, and continuous emergency power supply during utility failure.

Technical Specifications

Item	Specification
Power Range	50–2000kVA
Rated Voltage	220V / 380V / 400V / 415V / 480V
Frequency	50Hz / 60Hz
Engine Type	4-Stroke Water-Cooled Diesel Engine
Governor Type	Electronic Governor
Starting System	24V DC Electric Start
ATS Response Time	≤10s
Voltage Regulation	±1%
Frequency Regulation	±0.25Hz
Alternator Type	Brushless Copper Alternator
THD Level	≤5%
Insulation Class	H Class
Protection Grade	IP23 / IP44
Noise Level	68–75dB at 7m
Cooling System	Heavy-Duty Water Cooling
Fuel Tank Capacity	8–24 Hours Runtime
Continuous Operation	24-Hour Emergency Running
Parallel Synchronization	Available
Controller Options	Deep Sea / ComAp / SmartGen
ATS Type	Open / Closed Transition
Remote Monitoring	GSM / Ethernet Optional
Compliance Standards	ISO 8528 / IEC / CE

Core ICU Backup Reliability Technologies

Fast Emergency Startup
Engine coolant pre-heating system maintains 40–50°C standby temperature for ≤10s startup response.

Stable Voltage Recovery
AVR-controlled brushless alternator maintains voltage fluctuation within ±1% during sudden ICU load transfer.

Frequency Stability Control
Electronic governor controls frequency fluctuation within ±0.25Hz during ventilator and HVAC startup impact.

Low Harmonic Distortion Output
Alternator winding design reduces harmonic interference affecting patient monitoring systems.

Continuous Cooling Performance
Oversized radiator supports continuous operation under full emergency ICU load conditions.

ATS Coordination Function
Generator controller supports automatic ATS startup and emergency load transfer synchronization.

ICU Equipment Load Stability

Ventilator Startup Stability
AVR system reduces voltage dip during sudden ventilator and compressor startup.

Patient Monitor Protection
Low harmonic alternator output improves compatibility with sensitive monitoring systems.

Emergency HVAC Load Recovery
Electronic governor improves frequency recovery during ICU air handling system startup.

Stable Continuous Output
Generator maintains stable emergency output during rapid ICU equipment load fluctuation.

Compliance & Factory Testing

Full Load Bank Testing
0%, 25%, 50%, 75%, and 100% load testing completed before shipment.

ATS Emergency Transfer Testing
Automatic startup and transfer performance verified during simulation testing.

Voltage Recovery Inspection
Voltage stabilization performance tested under sudden load conditions.

Continuous Runtime Verification
Cooling temperature and fuel consumption monitored during continuous operation testing.

Harmonic Output Testing
Electrical output inspected for sensitive ICU equipment compatibility.

Compliance Standards

ISO 8528
IEC Standards
CE Certification
Factory Quality Inspection Procedures

Optional Configurations

Optional Item	Available Options
ATS System	Open / Closed Transition
Soundproof Canopy	68dB / 75dB
Fuel Tank	Base / External Tank
Controller Brand	Deep Sea / ComAp / SmartGen
Remote Monitoring	GSM / Ethernet
Synchronization System	Parallel Operation
Exhaust System	Residential Silencer
Cooling System	High Ambient Radiator
Circuit Breaker	ABB / Schneider
Trailer Type	Mobile Trailer Optional

Maintenance Accessibility

Side Maintenance Doors
Large service access improves routine maintenance efficiency.

External Fuel Filling Port
Supports rapid fuel replenishment during emergency operation.

Modular Filter Arrangement
Fuel, oil, and air filters positioned for quick replacement.

Alarm History Storage
Controller records fault alarms and shutdown history for troubleshooting.

External Drain Layout
Oil and coolant drain points simplify maintenance procedures.

FAQ

Q: Why is fast ATS transfer important for ICU systems?

A: Critical life-support equipment requires rapid emergency power restoration during utility failure.

Q: Can the generator support ventilator startup loads?

A: Yes. AVR-controlled alternator improves voltage recovery during sudden ventilator startup conditions.

Q: What ATS type is recommended for ICU emergency systems?

A: Closed transition ATS is commonly used for critical ICU backup applications.

Q: How is harmonic interference controlled?

A: Brushless alternator winding design helps reduce harmonic distortion affecting monitoring equipment.

Q: Can the generator operate continuously during long outages?

A: Yes. Heavy-duty cooling and external fuel tank configurations support extended emergency operation.

Q: What monitoring functions are available?

A: Optional remote systems support voltage, frequency, fuel level, runtime, and alarm monitoring.

Hot Tags: hospital icu backup diesel generator, China hospital icu backup diesel generator manufacturers, suppliers, factory

Hospital ICU Backup Diesel Generator