Product Overview
Outdoor Rental Diesel Generator units deliver 20-500kVA of reliable, multi-voltage power. Engineered with heavy-duty weatherproofing and Tier 4F/Stage V compliance, they ensure maximum uptime for demanding fleet operations.
Technical Parameters
|
Parameter Category |
Technical Indicator |
Standard Specification (Data) |
|
Power Performance |
Prime Power |
100 kVA / 80 kW |
|
Emission & Compliance |
Standby Power |
110 kVA / 88 kW |
|
Rated Voltage |
400V/230V (Switchable to 480V/277V) |
|
|
Rated Frequency / Speed |
50 Hz @ 1500 RPM / 60 Hz @ 1800 RPM |
|
|
Power Factor (cos φ) |
0.8 (Three-Phase) |
|
|
Emission Certification |
EPA Tier 4 Final / EU Stage V |
|
|
Sound Level |
≤ 65 dB(A) @ 7m (23ft) at 75% Load |
|
|
Engine & Alternator |
Engine Brand & Model |
Cummins QSB4.5-G11 / Perkins 1104D |
|
Induction System |
Turbocharged & Charge Air Cooled |
|
|
Alternator Brand & Model |
Stamford UCI274C / Leroy Somer TAL-A44-D |
|
|
Insulation / Protection Class |
Class H / IP23 |
|
|
Fuel & Autonomy |
Fuel Tank Type |
Double-Walled Bunded Tank (110% Containment) |
|
Fuel Tank Capacity |
530 L (140 US Gal) |
|
|
Fuel Consumption (100% Load) |
22.1 L/hr (5.8 US Gal/hr) |
|
|
Continuous Runtime |
≥ 24 Hours @ 75% Load |
|
|
Enclosure & Rigor |
Structure Rating |
IP56 (Control Cubicle), Weatherproof Canopy |
|
Control & Outlets |
Coating |
Zinc-rich Primer + Anti-UV Powder Coating |
|
Lifting Features |
Central Single-Point Lifting Eye & Heavy-Duty Forklift Pockets |
|
|
Controller Module |
Deep Sea Electronics (DSE) 7310 / ComAp InteliLite |
|
|
Smart Telematics |
4G/GPS Fleet Management System Ready |
|
|
Distribution Panels |
1 × 63A (3P), 3 × 32A (1P) IP67 Sockets + Busbar |
|
|
Dimensions & Weight |
Dimensions (L × W × H) |
2950 × 1150 × 1800 mm (116 × 45 × 71 in) |
|
Dry Weight |
1,950 kg (4,299 lbs) |
|
|
Wet Weight (Full Fluids) |
2,480 kg (5,467 lbs) |
Engineered for Rental Rigor
110% Bunded Base: Dual-containment basin prevents fuel, oil, and coolant leakage.
Galvaneal Steel Canopy: Zinc-coated steel resists salt mist and construction debris.
Four-Point ISO Corner Castings: Reinforced corners support repeated transport tie-down operations.
Three-Way Fuel Valves: Enables switching between internal and external fuel sources.
Dedicated Busbar Access: Bottom-entry slot protects heavy-gauge cables from crimping.
External Emergency E-Stop: IP65 emergency stop enables instant external shutdown.
Compliance & Technical Specs
|
Standard / Component |
Verification Criteria |
Factory Compliance & Output |
|
Wind Resistance |
ASCE 7-10 structural analysis |
Structural integrity up to 120 mph |
|
Grid Synchronization |
IEEE 1547 compliance testing |
Integrated Woodward analog voltage matching |
|
Enclosure Insulation |
BS EN 60034 thermal validation |
Rockwool lining rated non-combustible Class A1 |
|
Coating Durability |
ISO 9227 salt spray test |
Exceeds 1,000-hour C5-I industrial rating |
|
Impact Protection |
IEC 62262 mechanical testing |
External housing complies with IK10 rating |
|
Vibration Isolation |
ISO 8528-9 kinematic analysis |
Multi-axis elastomer dampeners limit vibration |
|
Lifting Integrity |
Lloyd's Register type approval |
Sub-base certified for 4× tare weight |
Control Systems & Smart Fleet
Tier-1 Controller Integration
Factory-configured with Deep Sea (DSE7310/8610) or ComAp controllers for standardized global fleet compatibility.
Open Modbus Architecture
Supports Modbus TCP/IP and J1939 CAN-bus protocols for seamless integration into existing rental ERPs.
Live Telematics Gateway
Standard 4G/LTE hardware transmits real-time engine RPM, coolant temperature, and multi-phase electrical output.
Remote Diagnostic Triangulation
System pushes explicit Diagnostic Trouble Codes (DTC) to offsite technicians, minimizing field-service dispatch costs.
GPS Geofence Security
Programmable tracking parameters trigger automated cellular alerts and remote engine lockout upon unauthorized transport.
Built-in Factory Capability
|
Manufacturing Process |
Core Equipment & Technology |
Production Output |
|
Precision Fabricating |
Amada CNC systems |
0.1 mm enclosure accuracy |
|
Structural Welding |
Automated welding cells |
Rigid steel chassis frames |
|
Powder Processing |
Twelve-stage coating line |
Zinc-rich anti-UV finishes |
|
Socket Machining |
Dedicated tooling stations |
Regional outlet configurations |
Global Support & Parts Supply
Tier-1 Component Sourcing:
Built exclusively with globally warrantied engines and alternators for local dealer network servicing.
Open-Market Consumables:
Utilizes industry-standard filtration and electrical elements obtainable through universal industrial supply channels.
Cloud-Accessible Documentation:
Factory-assigned QR codes on each unit grant instant digital access to schematics and parts manuals.
Critical Component Guarantee:
Factory maintains a dedicated inventory of major structural and control elements for immediate international dispatch.
FAQ
Hot Tags: outdoor rental diesel generator, China outdoor rental diesel generator manufacturers, suppliers, factory
